Already have a 20″ Front wheel assembly? What about the Go kart parts? If you said yes and are looking for a bullet proof platform to put them on then look no further. This is the all new re-designed R2 Powered Drift Trike Chassist. The R2 is identical in design to the R1 Frame except that it was engineered to work with a 20″ front wheel vs the 26″. Another key aesthetic feature is that the rear frame section has been narrowed 8 inches. This is so the R2’s stance looks proportionate to the smaller front end assembly. The R2 Powered Drift Trike Chassis is setup to allow 1-1/4″ pillow blocks to bolt to the frame. It features the same 3 bearing design as the original Road Ripper just on a sexier platform. The head tube of the R2 Powered Drift Trike Chassis is set at a perfect 32* for optimal control and stability while drifting. The chassis also features an adjustable seat bracket for those vertically challenged folks. The R2 Powered Drift Trike Chassis is fabricated out of beefy .095 wall 1-1/2″ DOM tubing. Most trikes on the market use a standard 1-1/4″ tubing. The R2 Powered Drift Trike Chassis can hold a max weight of 300lbs so even the large kids can have fun. As with any TDC part or component, the Road R2 Powered Drift Trike Chassis features a limited lifetime warranty. You bend it, crack it, or break it and we will send you a new one for free!
If you have questions please drop us an email. We would be happy to answer any questions you have.
If you are looking for a complete check out the R2 Powered Drift Trike. It comes fully assembled, powdercoated, and ready to ride.
Please Note that there are no kart parts included in this kit. It’s just the Raw steel frame.